Blog
10
2025
09
Operating and Usage Procedures for Installing a Fuel-Powered Paint Booth
Remember these 9 essential operational procedures to ensure your purchased paint booth provides you with peace of mind: 1. First, turn on the main power switch of the paint booth control console. 2. Open the air compressor’s air supply valve; check the oil-water separator and drain off all accumulated oil and water. Also, verify that the air pressure reaches at least 4 kg/cm². 3. Turn on the booth’s lighting switch and exhaust fan switch, then confirm that ventilation is functioning smoothly. 4. Once the vehicle enters the booth, immediately close the door tightly. Staff members should always close the door behind them after entering or exiting—non-staff are strictly prohibited from entering—to prevent dust, oil stains, and wax from contaminating the booth. 5. Absolutely no open flames or smoking are allowed inside the booth under any circumstances. 6. Workers must take proper personal protective measures: wear a respirator mask and don protective work attire to safeguard their health and ensure high-quality results. 7. Before starting the painting process, set the temperature between 60°C and 70°C and program the required baking time. Confirm there’s sufficient fuel, then activate the painting switch—the booth will automatically begin operation. 8. After completing the job, promptly drive the vehicle out of the booth and immediately clean the interior thoroughly. Finally, close the booth door and turn off the main power switch. 9. Only personnel from the painting team are authorized to operate the booth; unauthorized non-technical staff must not attempt to use it without permission. **Important Notes for Paint Booth Operation:** (1) Before using the booth, thoroughly inspect the electrical system for proper functionality, check if the main unit is adequately lubricated, ensure all lights are working, and verify that ventilation and exhaust systems are operating effectively. (2) Never leave the booth unattended during operation. Carefully adjust the temperature and baking time, and in case of any malfunction, avoid forcibly restarting the system to prevent potential explosion hazards. (3) When operating the air compressor, always verify that the electrical system is functioning correctly. Monitor the motor temperature during prolonged use, and regularly check the compressor oil level as well as the drainage system of the air tank. (4) Always wear a mask or respirator when using the spray gun, maintaining a safe distance. For extended periods of work, take regular breaks to avoid oxygen deprivation or poisoning. (5) If painting outdoors, pay close attention to surrounding vehicles to prevent overspray from landing on nearby cars, which could lead to unintended damage. (6) Strictly adhere to the prescribed painting procedures to avoid issues such as sagging, cracking, or surface imperfections. (7) After each painting session, promptly clean and wash the booth thoroughly, ensuring it remains spotless. Also, maintain the spray gun properly to keep it in optimal condition. (8) No activities other than painting should be conducted inside the booth under normal circumstances. (9) Operate and maintain the paint booth according to the manufacturer’s instructions, with dedicated personnel responsible for its management. (10) Regularly replace the filtration materials to maintain optimal performance. (11) Periodically remove paint dust and debris from all ventilation ducts to prevent blockages. Company Website: [www.gzqxjd.com] Contact Numbers: Ms. Wu: 18718849558 Ms. Yin: 13728095578 Mr. Yu: 13527819678 Company Address: No. 29-3 Hongqi Road, Zhuliao Town, Baiyun District, Guangzhou
Paint booth, automotive paint booth, fuel-powered paint booth
Previous Page